-
1 × $1,449.00 -
1 × $1,098.00 -
1 × $653.00 -
1 × $1,005.00 -
1 × $1,717.00 -
1 × $3,050.00 -
-
1 × $1,055.00 -
1 × $485.00 -
1 × $1,449.00 -
1 × $599.00 -
1 × $1,424.00 -
1 × $2,681.00 -
1 × $1,901.00 -
1 × $1,449.00 -
1 × $577.00 -
1 × $1,542.00 -
1 × $2,597.00 -
1 × $6,234.00 -
-
1 × $11,559.00 -
1 × $880.00 -
1 × $3,519.00 -
1 × $1,449.00 -
1 × $1,717.00 -
1 × $846.00 -
1 × $5,128.00 -
1 × $4,315.00 -
1 × $1,658.00 -
-
1 × $1,080.00 -
1 × $1,449.00 -
1 × $515.00 -
-
1 × $2,057.00 -
1 × $24,432.00 -
1 × $519.00 -
-
1 × $1,085.00 -
1 × $18,350.00 -
1 × $21,477.00 -
1 × $3,867.00 -
1 × $2,965.00 -
1 × $1,549.00 -
1 × $1,295.00
- High precision leakage current, duration and ground continuity settings.
- Allows no load setup of leakage current and test dwell times.
- Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
- Leakage currents can be set from 1-20 mA AC in 0.1mA increments.
- Dwell times can be set from 1-60 seconds in 1 second increments.
- Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
- Small and light. 9.25 wide x 4.75 high x 10 deep. 11 lbs. But rugged enough to test manufactured housing.
- Ground continuity check is defeatable for testing two-wire products.
- Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
- J2 and J3 cords allow connection of pigtail power leads.
- Simple test outcome judgement. Green lights mean pass red lights mean fail. Failing tests sound a buzzer as well.
- Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
- Operation Instructions are printed on the rear panel for easy reference.
- In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
- RED lights and a buzzer leave no question if a failure has occurred.
- Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
- Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).
