-
1 × $1,374.00 -
1 × $2,760.00 -
-
-
1 × $968.00 -
1 × $2,100.00 -
-
1 × $3,016.00 -
1 × $1,948.00 -
1 × $1,202.00 -
-
1 × $7,951.00 -
-
1 × $2,061.00 -
2 × $3,536.00 -
1 × $2,472.00 -
1 × $8,118.00 -
Instek PSW-1080L125 DC Power Supply, Triple CH, Prog. Switching, 30/40/160V, 1080W, PSW-Multi Series1 × $2,175.00 -
2 × $5,781.00 -
1 × $2,040.00 -
1 × $2,048.00 -
1 × $3,016.00
-
-
-
1 × $2,468.00 -
-
1 × $5,002.00 -
-
1 × $896.00 -
1 × $1,365.00 -
1 × $9,351.00 -
-
1 × $805.00 -
1 × $2,262.00 -
1 × $16,838.00 -
Keysight DSOX6002A: 2-Channel, 1 GHz Digital Oscilloscope with 4 Mpts, 20 GS/s, and 8-bit Resolution1 × $13,079.00 -
- Save over $147 with the PIE 820ELITE L VIP Kit.
- Limited Time Offer.
- FREELeatherman Sidekick Fuse Tool
- FREEAmprobe 5XP Digital Multimeter
- FREE 128 Pack of Green Calibration Labels
- Lighten up your toolbox Compact calibrator replaces toolbox of single function devices Milliamp • Voltage • Frequency • pH • Thermocouples • RTDs • Check Continuity • Pressure
- Technician friendly operation Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Similar to the single function PIE Calibrators.
- Use it as a milliamp and voltage calibrator
- Source 0 to 24.000 mA, 0 to 10.250 V dc, -20.000 to 99.999 mV and -500.00 to 999.99 mV
- Read to 24.000 mA, 60.00 V dc ±99.999 mV and ±999.99 mV Simulate 2-Wire Transmitters
- Simulate 2-Wire Transmitters
- Power up transmitters & loops with the built-in 24 V power supply
- Simplify HART hookups with built-in 250 Ohm resistor
>
- Troubleshoot loop problems Quickly diagnose ground fault and current leakage with patented loop diagnostic technology (US Patent 7,248,058).
- Calibrate directly in temperature to 0.1°C &0.1 °F Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 thermocouple & 9 RTD types.
- Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz & to 20.000 kHz.
- Troubleshoot loop & wiring problems ‘Beep’ out connections with the built-in continuity checker
- Simulate pH probes into transmitters & analyzers Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to -414.12 to 414.12 mV
- Measure pressure with optional pressure modules 32 modules for gauge, differential, compound and absolute pressure
- Easy to read Turn on the backlight & easily see the display in dark areas of the plant.
- Quickly set any three outputs plus automatic stepping & ramping Easily set any value with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. 2, 3, 5 & 11 steps automatically increment output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output. Set step/ramp time to 5, 6, 7, 8, 10, 15, 20, 25, 30 & 60 seconds.
- Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
- Evolutionary design PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke* under the Altek* label. The PIECAL 820 improves upon other brands by including a rubber boot, a backlit display with larger digits, higher accuracy and more ranges for greater flexibility.
