-
1 × $24,432.00 -
-
1 × $855.00 -
2 × $15,651.00 -
1 × $968.00 -
1 × $653.00 -
1 × $3,503.00 -
2 × $737.00 -
1 × $13,250.00 -
-
2 × $2,429.00 -
-
1 × $1,835.00 -
1 × $553.00 -
1 × $5,320.00 -
-
1 × $23,996.00 -
1 × $4,315.00 -
1 × $20,683.00 -
1 × $13,655.00 -
1 × $1,558.00 -
1 × $3,393.00 -
2 × $1,357.00 -
1 × $1,999.00 -
-
-
1 × $15,651.00 -
1 × $3,652.00 -
2 × $4,206.00 -
-
1 × $28,102.00 -
1 × $3,426.00 -
1 × $3,602.00 -
1 × $2,849.00 -
1 × $3,368.00 -
1 × $855.00 -
-
1 × $653.00 -
1 × $2,664.00 -
1 × $603.00
- The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
- There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
- Gage depth is set by adjusting the gage feet up or down
- A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
- The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
- Unless otherwise specified, the dial indicator sent with the gage reads in .0005 increments with a total range of ±.030
- The dial has a double row of graduations reading in opposite directions – minus in red and plus in black
