-
1 × $1,826.00 -
1 × $2,353.00 -
1 × $477.00 -
1 × $1,449.00 -
1 × $1,175.00 -
1 × $23,996.00 -
-
1 × $1,098.00 -
1 × $9,041.00 -
1 × $16,040.00 -
1 × $2,882.00 -
1 × $1,005.00 -
1 × $941.00 -
-
1 × $3,569.00 -
1 × $1,104.00 -
-
1 × $830.00 -
1 × $10,638.00 -
1 × $1,449.00 -
1 × $7,491.00 -
1 × $15,379.00 -
1 × $4,985.00 -
-
1 × $2,262.00 -
1 × $959.00 -
1 × $9,546.00 -
1 × $3,393.00 -
1 × $1,348.00 -
1 × $1,156.00 -
-
1 × $2,727.00 -
1 × $1,449.00 -
1 × $1,449.00 -
1 × $1,391.00 -
1 × $2,639.00 -
1 × $505.00 -
1 × $959.00
-
1 × $12,893.00 -
-
1 × $555.00 -
1 × $912.00 -
-
1 × $8,797.00 -
1 × $959.00
-
1 × $14,761.00 -
-
-
1 × $3,633.00 -
1 × $1,542.00 -
1 × $959.00
-
1 × $802.00 -
1 × $805.00 -
-
1 × $491.00 -
-
-
1 × $743.00 -
1 × $536.00 -
1 × $956.00 -
1 × $1,634.00
- High precision leakage current, duration and ground continuity settings.
- Allows no load setup of leakage current and test dwell times.
- Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
- Leakage currents can be set from 1-20 mA AC or 1-5 mA DC in 0.1mA increments.
- Dwell times can be set from 1-60 seconds in 1 second increments.
- Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
- Small and light. 9.25 wide x 4.75 high x 10 deep. 11 lbs. But rugged enough to test manufactured housing.
- Ground continuity check is defeatable for testing two-wire products.
- Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
- J2 and J3 cords allow connection of pigtail power leads.
- Simple test outcome judgement. Green lights mean pass red lights mean fail. Failing tests sound a buzzer as well.
- Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
- Operation Instructions are printed on the rear panel for easy reference.
- In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
- RED lights and a buzzer leave no question if a failure has occurred.
- Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
- Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).
