-
1 × $4,315.00
-
1 × $1,608.00
-
1 × $2,363.00
-
1 × $1,055.00
-
1 × $3,930.00
-
1 × $871.00
-
1 × $1,658.00
-
1 × $1,658.00
-
2 × $2,061.00
-
1 × $603.00
-
1 × $662.00
-
1 × $1,889.00
-
2 × $1,952.00
-
1 × $959.00
-
1 × $545.00
-
1 × $879.00
-
1 × $817.00
-
1 × $3,510.00
-
1 × $14,766.00
-
1 × $1,005.00
-
1 × $1,357.00
-
1 × $8,044.00
-
1 × $1,873.00
-
1 × $1,713.00
-
1 × $7,951.00
-
1 × $5,195.00
-
1 × $4,147.00
-
1 × $1,441.00
-
1 × $1,860.00
-
1 × $805.00
-
1 × $4,919.00
-
1 × $1,634.00
-
1 × $1,080.00
-
1 × $1,893.00
-
1 × $3,016.00
-
1 × $974.00
-
1 × $16,105.00
-
1 × $1,823.00
-
1 × $683.00
-
1 × $3,368.00
-
1 × $3,209.00
-
1 × $2,965.00
-
1 × $1,005.00
-
1 × $5,111.00
-
1 × $607.00
-
1 × $959.00
-
1 × $2,681.00
-
1 × $9,384.00
-
1 × $1,337.00
-
1 × $3,971.00
-
1 × $3,368.00
- Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available)
- Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
- PowerWave data capture: 435 and 437 Series II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.)
- Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up
- Automatic Transient Mode: 435 analyzers capture 200 kHz waveform data on all phases simultaneously up to 6 kV
- Fully Class-A compliant: 435 Series II analyzers conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
- Mains signaling: analyzers measure interference from ripple control signals at specific frequencies
- 400 Hz measurement: 437 Series II analyzer captures power quality measurements for avionic and military power systems
- Troubleshoot real-time: Analyze the trends using the cursors and zoom tools
- Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
- Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places
- Automatic Trending: Every measurement is always automatically recorded, without any set-up
- System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard
- Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals
- View graphs and generate reports: With included analysis software
>
Each Unit Includes
- BC430 Power Adapter
- International plug adapter set
- BP290 (Single capacity Li-ion battery) 28Wh (7 hours or more)
- Leads TL430 Test lead and Alligator clip set
- Color coding WC100 color coding clips and regional decals
- Flexible current probes i430flex-TF, 24 inch (61cm) length
- 8 GB SD card (32GB optionally)
- PowerLog on CD (includes operator manuals in PDF format)
- USB cable A-Bmini
- Carrying case C1740 Soft Case