-
1 × $1,231.00 -
1 × $1,449.00 -
1 × $997.00 -
1 × $8,797.00 -
-
1 × $1,131.00 -
1 × $3,368.00 -
1 × $1,094.00 -
1 × $1,549.00 -
-
1 × $2,413.00 -
-
1 × $805.00 -
1 × $5,932.00 -
-
1 × $3,536.00 -
1 × $3,091.00 -
1 × $1,307.00 -
1 × $3,572.00 -
1 × $4,122.00 -
1 × $27,148.00 -
1 × $1,055.00 -
1 × $1,449.00
-
1 × $847.00 -
1 × $1,005.00 -
1 × $2,262.00 -
1 × $1,055.00 -
1 × $956.00 -
1 × $805.00
-
1 × $1,433.00 -
1 × $2,941.00
- Range to 660°C
- Meets all ITS-90 reMeets all ITS-90 requirements for resistance ratios
- Rtp drift <, 20mK after 500 hours at 660°C
- Strain-free sensor design by Harts SPRT engineers
- High-temp PRT, 25.5 Ohm, 305 mm (12 in)
- If youre using block calibrators, furnaces, or temperature points above normal PRT temperatures (420 °C), then these two PRTs are for you
- The 5626 is nominally 100ohms and the 5628 is nominally 25.5 Ohms
- Both instruments have a temperature range of -200 °C to 661 °C
- They make great working or check standards for calibration work up to the aluminum point
- Using a regular PRT at temperatures above 500°C exposes the platinum to contamination
- If the PRT is used as a reference or calibration standard, contamination is a major problem
- SPRTs, which are more expensive and delicate, can handle the higher temperatures, but with greater risk to the instrument due to shock, contamination, or mishandling
- The 5626 and 5628 are designed to reduce the contamination risk through the use of internal protection while not impairing performance
