-
1 × $8,885.00
-
1 × $490.00
-
1 × $1,449.00
-
1 × $1,055.00
-
1 × $2,262.00
-
1 × $2,882.00
-
1 × $1,441.00
-
1 × $2,100.00
-
Instek PSW-1080L245 DC Power Supply, Triple CH, Prog. Switching, 40/80/160V, 1080W, PSW-Multi Series1 × $2,175.00
-
1 × $16,755.00
-
1 × $9,396.00
-
1 × $2,346.00
-
1 × $1,005.00
-
1 × $1,508.00
-
1 × $5,663.00
-
1 × $1,449.00
-
1 × $27,148.00
-
1 × $8,797.00
-
1 × $25,456.00
-
1 × $1,608.00
-
1 × $997.00
-
1 × $1,055.00
-
1 × $13,992.00
- Range to 660°C
- Meets all ITS-90 reMeets all ITS-90 requirements for resistance ratios
- Rtp drift <, 20mK after 500 hours at 660°C
- Strain-free sensor design by Hart’s SPRT engineers
- High-temp PRT, 25.5Ω, 305 mm (12 in)
- If you’re using block calibrators, furnaces, or temperature points above normal PRT temperatures (420 °C), then these two PRTs are for you
- The 5626 is nominally 100Ω and the 5628 is nominally 25.5Ω
- Both instruments have a temperature range of –200 °C to 661 °C
- They make great working or check standards for calibration work up to the aluminum point
- Using a regular PRT at temperatures above 500°C exposes the platinum to contamination
- If the PRT is used as a reference or calibration standard, contamination is a major problem
- SPRTs, which are more expensive and delicate, can handle the higher temperatures, but with greater risk to the instrument due to shock, contamination, or mishandling
- The 5626 and 5628 are designed to reduce the contamination risk through the use of internal protection while not impairing performance
>
Each Unit Includes
- Accredited Calibration
- Complete with ITS-90 constants and a resistance-versus-temperature table
- Spade Lugs