-
1 × $7,951.00 -
1 × $448.00 -
2 × $3,368.00 -
1 × $595.00 -
1 × $2,262.00 -
EA Elektro-Automatik EA-PS 11000-10 2U DC Power Supply, Autoranging, Single Output, 1000 VDC, 10 ADC1 × $4,351.00 -
1 × $980.00 -
1 × $11,105.00 -
1 × $5,650.00 -
1 × $12,627.00 -
1 × $1,826.00 -
1 × $1,055.00 -
-
-
1 × $603.00 -
-
2 × $603.00 -
1 × $503.00 -
1 × $3,117.00 -
1 × $905.00 -
1 × $1,337.00 -
1 × $1,104.00 -
1 × $111,697.00 -
1 × $1,337.00 -
1 × $2,279.00 -
-
1 × $959.00 -
1 × $577.00 -
1 × $3,276.00 -
1 × $9,744.00 -
1 × $2,338.00 -
1 × $1,709.00 -
1 × $1,055.00 -
1 × $2,564.00 -
1 × $959.00
-
1 × $1,873.00 -
1 × $1,713.00 -
1 × $1,357.00 -
1 × $1,055.00 -
1 × $844.00 -
1 × $5,044.00 -
1 × $1,055.00 -
1 × $743.00 -
-
1 × $1,055.00 -
-
-
1 × $1,357.00 -
1 × $855.00 -
-
2 × $959.00
-
1 × $1,337.00 -
1 × $603.00 -
1 × $653.00 -
1 × $1,860.00 -
1 × $905.00 -
1 × $457.00 -
1 × $1,131.00 -
1 × $809.00 -
1 × $1,253.00 -
1 × $5,698.00 -
1 × $2,689.00 -
1 × $1,961.00 -
1 × $3,368.00 -
1 × $8,702.00 -
1 × $3,267.00 -
1 × $1,960.00
Offering CAT IV, the Megger MIT1025 10-kV Insulation Resistance Tester is compact, light 10 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and lighter than its predecessor making it even easier to carry and store.
- Save over $735 with the Megger MIT1025 VIP Kit
- Limited Time Offer
- FREE Megger MIT410/2
- Smaller size and lighter weight allows easier transport and use without compromising performance.
- High measurement range enables installation testing and long-term trending of higher value apparatus.
- Unique dual case design allows for fire-retardant protection while maintaining ruggedness.
- High-quality, flexible silicon test leads meet safety regulations of IEC 61010-31:2008 while ensuring measurement accuracy.
- Timed IR plus PI, DAR, DD, SV and ramp tests maximize diagnostic testing capability.
- Operate from line power when battery fully discharged (charges while operating).
- Two and one-half hour full battery charge time (one half hour charge for one hour testing) significantly increases productivity.
- Up to six hours continuous testing (5 kV) on a single battery charge.
- Industry best guard terminal performance to insure highest accuracy of measured values.
- Enhanced driver technology provides plug-and-play when connected to the internet. No tedious and potentially interruptive setup procedures.
- Dedicated voltmeter function (30 V to 660 V) with frequency measurement allows the user to check for induced voltages.
- CATIV 600 V safety rating on all terminals allows for safe use in the widest range of applications.
- Large LCD with automatic backlight.
- Noise filter rejects up to 3 mA noise for effective operation in electrically noisy environments.
- High altitude operation up to 3000 m while maintaining CATIV 600 V rating.
- Rotary switch operation for easy, intuitive field use.
- Field replaceable battery
>
Each Unit Includes
- FREE MIT410/2
- User guide CD
- Power lead
- 10 ft (3 m) leadset x 3, medium insulated clips
- 10 ft (3 m) 3 m leadset x 3, large insulated clips
