-
1 × $1,709.00 -
2 × $804.00 -
2 × $905.00 -
1 × $2,890.00 -
1 × $2,061.00 -
1 × $1,407.00 -
1 × $955.00 -
2 × $603.00 -
1 × $867.00 -
1 × $1,658.00 -
1 × $1,210.00 -
1 × $2,664.00 -
2 × $1,206.00 -
1 × $1,583.00 -
1 × $905.00 -
1 × $1,960.00 -
1 × $1,709.00 -
1 × $2,722.00 -
1 × $5,446.00 -
1 × $595.00 -
2 × $1,155.00 -
1 × $1,558.00 -
2 × $515.00 -
1 × $1,709.00 -
1 × $905.00 -
1 × $653.00 -
1 × $955.00 -
1 × $855.00 -
-
1 × $653.00 -
1 × $503.00 -
-
1 × $2,849.00 -
1 × $1,860.00 -
1 × $959.00
- The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
- There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
- Gage depth is set by adjusting the gage feet up or down
- A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
- The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
- Unless otherwise specified, the dial indicator sent with the gage reads in .0005 increments with a total range of ±.030
- The dial has a double row of graduations reading in opposite directions – minus in red and plus in black
